Dolmar Chainsaw Review

 Nothing runs quite like a high-quality chainsaw. These powerful tools should be handled carefully, and it’s always surprising how much power even small chainsaws have at their disposal. Choosing a great chainsaw can be a difficult choice, but a good starting point is a Dolmar chainsaw. Dolmar is an excellent brand that’s affordable, durable and provides the horsepower you need for any type of project. Whether you’re clearing small brush, cutting rounds for firewood or clearing trees professionally, choosing the right chainsaw can be the most important decision. This review will help you find out if a Dolmar chainsaw is a right choice for you.

Dolmar Chainsaw
Pros & Cons

The Makita, or Dolmar, the chainsaw is an excellent brand with many reasons to buy it. However, there are downsides to this 16-inch chainsaw, so consider both sides carefully before purchasing, whether it’s your first chainsaw or you’re an avid user.


  •  Highly durable, with a two-sided magnesium body and great power-to-weight ratio
  • Easy to replace the air filter, and the choke and stop switch are combined into one, easy-to-use switch
  • Ergonomic and comfortable, vibration-reducing technology. 
  • Primer pump works well even in cold conditions, and you can adjust the baffle for extreme weather.
  • The ignition is spring-assisted and is designed to start easily, so you won’t have to pull the cord multiple times. 
  • Lightweight, yet still packs plenty of power for any project


  •  Price
  •  Gas-powered chainsaw
  • Additional maintenance required
  • One-year warranty is far shorter than most competitors

Dolmar Chainsaw

What Is a Dolmar Chainsaw?

If you’ve never heard of Dolmar chainsaws before, you may be more familiar with their new branding. Dolmar Outdoor Equipment was purchased by Makita in 1991. Since then, the Dolmar name has still been used for excellent quality, gas-powered chainsaws, and other outdoor equipment. However, in 2016, Makita began to phase out the name and branding of Dolmar. Typical Makita power tools have a vivid teal color scheme. If you see any gas-powered orange outdoor equipment with the Makita name, these are Dolmar-designed equipment. If you can’t find a Dolmar chainsaw, look for Makita gas-powered chainsaws, and you can be confident that you’ll be receiving the same time-tested build quality and features of a Dolmar chainsaw.

 These chainsaws are some of the most durable or high-quality chainsaws on the market and are great for professionals and experienced homeowners. It’s a perfect choice if you need a reliable chainsaw that you’ll use consistently or occasionally with proper care. Take a look at a few models, and consider whether these excellent chainsaws are the right choice for you.

Buyer’s Guide for Chainsaws

If you’re new to chainsaw operation or haven’t bought a new chainsaw in years, there are a few key features to consider before choosing the right chainsaw for the right job. Not all machines are built the same, and it can be dangerous to use an improperly sized saw for the job. Take a look at each of these features and decide which chainsaw you need for your project.

Chainsaw Safety

The most important part of operating a chainsaw is safety. If you’ve never operated a chainsaw before, these machines can be incredibly dangerous. The high horsepower and RPMs means it can easily injure you, so be sure you have reviewed the owner’s manual carefully. Eye and ear protection are also critical components of a safe and injury-free operation. Never operate a chainsaw in low-light situations, or when you are overly fatigued. These are just a few basic chainsaw safety suggestions, and each chainsaw may have slightly different components to consider. If you aren’t familiar with chainsaw kickback, or the dangers it can cause, it’s highly recommended that you take a safety course before operating your chainsaw. If you use the top, outer tip of your chainsaw to cut, it could bounce back very quickly and violently. This is a leading cause of chainsaw accidents, so be sure you understand the proper cutting method before using your chainsaw.

Bar Length

The bar, or guide bar, is the part of a chainsaw that holds the chain and keeps it in the right position. It’s critical to use the correct chainsaw size, and the length of the cutting area is described by bar length. You’ll want to have a chainsaw with roughly two extra inches of the bar than the wood you are cutting. So, if you have a log that’s 14 inches in diameter, you’ll want a 16-inch bar chainsaw. Be careful buying too large of a chainsaw, as a longer chainsaw is more unwieldy and difficult to control. If you’re cutting a wide range of trees and limbs, it’s better to buy two chainsaws than to use a large chainsaw dangerously. If you’ve never used a chainsaw before, it’s not recommended that you start with a long bar. Keep it under 18 inches, and you’ll have a much safer and more manageable experience.


Because all gas-powered chainsaws use a 2-stroke engine, horsepower is a great way to measure the cutting power of your saw. If you’re just beginning, any chainsaw will have plenty of horsepower for your needs. Larger chainsaws with more horsepower also tend to be heavier and more unwieldy. As you become more experienced, consider the horsepower you need for a job, but if it’s your first chainsaw don’t get caught up in high-horsepower marketing.

Gas or Electric

There are three basic types of chainsaws for you to consider. Most chainsaws, including professional-grade saws, are gas powered. They are louder, more expensive and have more maintenance. However, gas-powered chainsaws are necessary if you’re cutting hardwoods and give you plenty of power.

Electric chainsaws are inexpensive and popular for homeowners. You can purchase either corded or battery-operated models, and they require far less maintenance than a gas-powered chainsaw. However, electric chainsaws will struggle with cutting hardwoods or larger trees. They are perfect for occasional use and light trimming. The Dolmar chainsaw being reviewed is a gas-powered chainsaw, which is perfect for both experienced homeowners and professionals.

Handle Position

There are two types of handles for chainsaws, and it’s important that you choose the correct one for the job. You’ll almost always need a rear-handle chainsaw, which is used for standing firmly on the ground and cutting a tree near the ground. The second handle type is designed for professional use only. A top-handle chainsaw has an elevated handle, which is great for use while you are in a harness or in a tree. If you think the idea of climbing a tree and operating a chainsaw to trim limb sounds dangerous, you would be right. This handle type requires specialized training to use effectively and safely, so only purchase these chainsaws if you’ve undergone the proper training.

Chainsaw Maintenance

A well-kept chainsaw should last you for years. However, you can also ruin a chainsaw very quickly if you don’t take care of it properly. Each chainsaw is slightly different, so be sure to read the owner’s manual. In general, gas-powered chainsaws need these three things to operate effectively: an oil-gas mixture, bar oil, and a sharp chain. Because chainsaws use a 2-stroke engine, you’ll need to mix oil with your gasoline. Thankfully, nearly every brand sells oil that you can easily mix with regular gasoline. Using an improper mixture can easily damage the engine and dramatically shorten the lifespan of your chainsaw. You’ll also need bar oil, which keeps the chain lubricated and running smoothly. Finally, keep your chain sharp using a file or specialized chain sharpening tool. Be sure you understand the exact way to sharpen chains, as it is a critical task to keep your chainsaw running smoothly and safely. Your chain should have both teeth and guides. You’ll need to occasionally sharpen the guide, but you’ll need to sharpen the teeth with every use. Each tooth should be sharpened the same amount, in order to provide a clean and smooth cut. Otherwise, you increase the risk of chainsaw kickback.

Dolmar Chainsaw: Specifications of the Makita EA4300FRDB 16-Inch Chainsaw

  • 16-inch bar
  • 2-stroke engine
  • 42 cc
  • 3 Horsepower
  • 13,500 RPM
  • Weight: 10.8 pounds
  • One-year warranty

Dolmar Chainsaw: Pricing

There’s a wide range of prices available for high-quality chainsaws. Depending on your budget and the amount of use, determine which chainsaw is most cost-effective for your particular projects. On the low end, you can purchase electric chainsaws for as little as $50. You can also pay over $600 for a high-quality, professional chainsaw. Bigger isn’t always better, to determine the size and power you need before choosing the perfect chainsaw. While some chainsaws have added convenience features or more durable designs, most chainsaws offer the same basic features. Higher priced chainsaws have a longer bar and more horsepower, and gas-powered chainsaws are more expensive than most electric models.

Dolmar Chainsaw: How It Compares

Makita EA4300FRDB 16-Inch Chainsaw

  • Ease of Use: 5 stars
  • Build Quality: 5 stars
  • Warranty: 4 stars

Ryobi 16-Inch Chainsaw

  • Ease of Use: 4 stars
  • Build Quality: 3 stars
  • Warranty: 5 stars

The Ryobi 16-inch chainsaw is a great choice for inexperienced homeowners who still need a long bar with a powerful engine. It’s gas-powered, so you’ll be able to cut through hardwoods and softwoods alike. It includes a few convenient features, like automatic oiling, a sturdy carrying case and vibration isolation in three key areas. This helps keep you cutting safely and comfortably since fatigue can cause you to lose control of your chainsaw. However, for professional use, this chainsaw has less horsepower and a lower cc engine than its competitors. It’s not built as tough as the other models, so if you’re looking for a durable chainsaw for frequent use, this isn’t a great choice.

Husqvarna 240 16-Inch Chainsaw

  • Ease of Use: 3 stars
  • Build Quality: 5 stars
  • Warranty: 5 stars

An excellent brand for chainsaws, Husqvarna has a diverse line of chainsaws for experienced users and professionals. The 16-inch chainsaw is less expensive than the Makita chainsaw, but still provides rugged durability and high-end performance. Some customers have difficulty starting this chainsaw. However, if you follow the instructions and keep it maintained, it can start in even the harshest conditions. Choose this model if you want a good mixture of performance and affordability and don’t mind a slightly more difficult startup.

Dolmar Chainsaw: Conclusion

With its excellent quality and durability, the Makita chainsaw receives 4 out of 5 stars. Just like the traditional Dolmar chainsaw design, it’s built for both professionals and homeowners, with the perfect combination of easy-to-use features and durable design. However, it’s not the most affordable chainsaw, and as a gas-powered machine, it can be more dangerous and noisy to operate. Take a minute to review each chainsaw, and consider larger or smaller chainsaws from each brand. While this list doesn’t cover any electric chainsaws, this may also be a practical choice for you. Chainsaws can be versatile, but they are designed for specific uses. Be sure to choose the correct bar length and power for your chainsaw. While you may want to choose the most affordable or the most premium-priced chainsaw, neither of these will work well for every project. Trim your trees, prepare your firewood and create a beautiful yard and landscape with a high-powered, highly effective chainsaw.






Featured Image via Amazon logo, text and banner added.

Last update on 2021-01-15 at 21:41 / Affiliate links / Images from Amazon Product Advertising API

About the Author Emily Taylor

My name is Emily Taylor, gardening is my passion and I’m looking forward to sharing it with everyone. I know that there are millions of people out there want their backyard and garden be attractive just like their front yard, so I am here to help you create your own backyard paradise.

Leave a Comment:

Pin It on Pinterest

Share This