How Much Does It Cost To Dig A Well? Preparing For The Cost

water well

Owning a well is very important especially if your property is located in areas where water from a pipeline is not readily available. Wells are lifesavers and although you might not need to use it right away, you’ll definitely thank yourself for having one when drought or water shortages happen.

Well water is quite beneficial for your health. This is because it is all-natural and contains a lot of minerals. Well water is also free to use for as long as you own it. This is why it can be of great help to your budget especially if you want to cut back on your water expenses.

With that said, there is a lot of benefits to having a well. But is having one in your property practical? One thing that affects the possibility is how much it costs to dig a well. A well cannot be built anywhere, and you might have to spend a lot trying to have one dug in your property.

How Much Does It Cost To Dig A Well? Preparing For The Cost

The Different Types Of Wells

scoop on water well

There are three types of wells. Each of them has different advantages and is designed to be used in specific conditions. The first type is the dug well, the oldest type of well. It was done in the past by using shovels and simple tools. It uses bricks and stones for structure.

The second type is the drilled well. This type of well is the one that is commonly used today. This type is ideal for those who need to dig very deep wells since it is constructed with the use of a cable tool or a rotary cable machine. This allows you to dig several hundred feet deep. A casing is used to line the hole.

The last type is the driven well. This type of well is made using a small pipe. It is ideal for locations that are made up of sand or gravel that contain a lot of water. The well point that has a screen will be attached before the casing is brought down. The driven well type is cheap and easy to construct.

What Is The Average Cost Of Digging A Well?

pulling scoop of water from water ưell

The cost of digging a well depends on the method that is being used. Some contractors will also increase or decrease the asking price depending on the difficulty, the materials used, as well as the depth of the well per foot. An average wells that are 100 feet deep will cost around $1,500 - $3000.

For wells that are below 100 feet, however, the drilling, case and well cap installation as well as the water installation will be around $15 - $30 per foot. The cost will increase if the well needs to be dug deeper, if your area is inaccessible or if extra man power or machinery is required to make the well.

After the well has been dug and the water installation has been finished, you can opt to have a water system installed. Water systems for wells can cost an additional $2,000 - $8,000. This can include the pump, control panel and electrical wirings. You can also spend $3,000 - $20,000 for a delivery system.

a water well

If you want to upgrade further, you can have an intricate water system installed on your property. This will cost as much as $20,000 - $50,000 depending on the specifications. If you need to have a pump system installed, you will also have to spend another $7,000 - $8,000.

In most cases, the contractors will not be able to make exact quotes or estimates simply because they do not know yet how long they need to dig or if they have to go through bedrock to make the well. This is why they will recommend that you try to set aside a budget of around $5,500 - $9,500 just to be sure.

Conclusion

well

Wells can provide you with a lot of benefits. Aside from being able to provide you with pure, clean and mineral-rich water, the well can give you an abundant supply should water shortages happen. The water from your own well is free, you can actually use as much or as little of it without worrying about paying.

Of course, digging the well will be quite expensive. It is very important that you try to put the expenses into consideration so you will know whether or not having a well is a practical option. Try to ask a contractor to make an estimate and find out if the cost is within your budget.

Having a well is a very practical option especially if water is not readily available in your property. If you want basic wells, they can cost as much as $1,500 - $3000. But if you also want to have a water system installed, you might have to spend more so you can use the water from the well conveniently.

Do you have a well in your property? Tell us more about how much it costs in the comment section.

About the Author Emily Taylor

My name is Emily Taylor, gardening is my passion and I’m looking forward to sharing it with everyone. I know that there are millions of people out there want their backyard and garden be attractive just like their front yard, so I am here to help you create your own backyard paradise.

Leave a Comment:

Pin It on Pinterest

Share This