How To Check Hydraulic Fluid On Kubota Tractor?

Kubota tractors are known for their reliability. As a matter of fact, there are a lot of farmers out there who like their products simply because they are able to carry as much as 1,000 pounds easily and because they are known to be very easy to use for different kinds of projects.

From helping you with the farm, creating the ideal properties, changing the look of your garden and even when it comes to getting enough firewood, Kubota tractors can easily be used to help you take on any of these projects. But just like most tractors, it will also need to go through maintenance checks.

One of the things you need to do is to check the hydraulic fluid of your tractor. This is because tractors are built with power in mind. And one of the ways for that power to be transported is through the use of a hydraulic fluid. Here’s how you can make sure that you will have enough of it in your Kubota tractor:

Our Favorite Fuels

Things To Know When Checking The Kubota Tractors Hydraulic Fluid

filling hydraulic fluid

In most cases, whenever your tractor is low on hydraulic fluid, you will start hearing weird noises coming from it, similar to when your car is low on power steering fluid. These weird or abnormal noises are typically caused by aeration, which can happen if the hydraulic fluid level in the tractor is too low.

Aeration is basically when air is allowed to get into the hydraulic fluid. This will actually degrade the fluid and can also damage your tractor when it loses lubrication. It can also cause overheating and even the burning of seals. Low fluid levels can cause a vortex can form and allow the air in.

In some cases, the tractor can also stop working if the oil is too low. The volume of the fluid needs to be properly maintained so that the heat inside the tractor can be easily dissipated. This can happen when a fitting in the hydraulic system gets lose and the tractor ends up losing several gallons of fluid.

kubota tractor

If your Kubota tractor has lost a lot of hydraulic fluid, you need to understand that you cannot simply use just any hydraulic fluid that is readily available. This is because most Kubota tractors will make use of UDT and Super UDT hydraulic fluids.

If the tractor has too much fluid on the other hand, it can cause cavitation. This means that vapor cavities can form in the fluid which will create a knocking sound when it implodes. This can also cause metal erosion, damage to the hydraulic system and even a complete mechanical failure.

How To Check Hydraulic Fluid On Kubota Tractor?

hydraulic lines

If you want to check the hydraulic fluid level of your Kubota tractor, you need to know the model of the tractor first. This is because different models will have different means of telling you how low the hydraulic fluid is. In most cases however, you will have to check the tractor’s transmission dipstick.

The transmission dipstick is typically found in the rear end housing. If there is no dipstick to be found there, you can try the transmission shift cover. If the tractor model does not have a dipstick, you should try to find a plug on the transmission housing since it might help tell you know the fluid levels.

hydraulic piston

Other models will also have a fill plug and a dip stick located under the seat of the tractor in the back area. There are also models that have the gauge level indicator located near the clutch pedal on the left hand side. They will also have an indicator light up on the dashboard if a filter needs replacement.

When checking the hydraulic fluid on a Kubota tractor, you should try to see the levels indicated on the dipstick. This will allow you to know whether you have too little or too much hydraulic fluid inside the tractor. The gauge indicators can also help you know if you need to top off the hydraulic fluid.


a kubota tractor

If you are asked to check the hydraulic fluid in the tractor, it can simply means that you should try to see if there is not enough or too much fluid in the system. You should understand that if there is too little fluid in the tractor, it can cause aeration and lead to overheating and other problems.

When there is too much fluid on the other hand, knocking sounds can be heard as a result of cavitation. The best way to avoid this is by checking the fluid levels through the dipstick or through the gauge indicators. You can also check the plug on the transmission depending on the tractor’s model.

Last update on 2021-01-15 at 21:31 / Affiliate links / Images from Amazon Product Advertising API

About the Author Emily Taylor

My name is Emily Taylor, gardening is my passion and I’m looking forward to sharing it with everyone. I know that there are millions of people out there want their backyard and garden be attractive just like their front yard, so I am here to help you create your own backyard paradise.

Leave a Comment:

Bob Detomasi says Jan. 2018

Model L3710’s glass eye was totally missed.

Jay Bishop says Feb. 2018

Hi Emily,

I found the information you’ve posted concerning checking fluids on the Kubota tractor to be helpful and we’ll written. Thank you very much for sharing.

sharon schlichting says Mar. 2018

can`t find where to check my hydraulic fluid on my (just bought} kabota L2601

sharon schlichting says Mar. 2018

Can`t find where to check the hydraulic fluid on my (just bought ) Kabota L2601

Just somebody says Apr. 2018

Still don’t know if I check my hydraulic fluid level with engine running or not or implements raises or lowered

Add Your Reply

Pin It on Pinterest

Share This